Cutting Tools: World Markets, End-Users & Competitors
2005-2010 Analysis & Forecasts. 4 Vols
| Publication Date | April 2005 |
|---|---|
| Publisher | Dedalus Consulting |
| Product Type | Report |
| Pages | 312 |
| ISBN Number | not applicable |
| Product Code | DUS00002 |
Summary
This Four Volume Report Analyzes The Global Market For Cutting Tools By Total Consumption Value, Demand Trends, End-User Markets, Applications And Competitors. Products Covered Include: Solid Tools And Indexable Inserts; Milling, Turning And Drilling Tools. Grades Include Carbide, Ceramic, Cermet, Cbn/Pcbn, Diamond And Steel. Products Are Analyzed By Country And End-Use Markets. Market Trends And Forecasts Are Provided For The Years 2005-2010.
The Report Is Presented In Four Volumes And Contains Over 300 Pages And 290 Tables And Charts Of Vital Information On The Cutting Tools Market. The Four Volumes Are:
Volume I: Industry Overview
2 Sections 58 Pages Over 35 Tables And Charts
Volume Ii: Global Cutting Tools Industry Analysis By Product
3 Sections Over 105 Pages Over 100 Tables And Charts
Volume Iii: End-User Industry Analysis By Country
18 Sections Over 200 Pages Over 215 Tables And Charts
Volume Iv: Competitive Analysis Of Producers
2 Sections Over 125 Pages Over 50 Producer Profiles
Content
- Tool Types
- Indexable Inserts
- Solid Cutting Tools
- Product Types
- Milling Tools
- End/Face Milling
- Slotting/Slitting
- Plunge Milling Contouring
- Profiling Threading
- Micromachining
- Turning Tools
- Iso Turning
- Parting/Grooving
- Threading
- Profiling
- Micromachining
- Drilling Tools
- Standard Depth Drilling
- Deep Hole Drilling
- Threading
- Micromachining
- Other Cutting Tools(E.G., Reamers, Burrs, Etc.)
- Cutting Tool Grades Covered
- Cemented (Tungsten) Carbides
- Cermets
- Ceramics
- Cbn/Pcbn
- Diamond Tools
- Tool/High-Speed Steel
- End-User Industries Covered
- Aerospace
- Automotive
- Chemical Processing
- Communications
- Construction
- Defense/Military
- Electronic
- General Machining
- Medical/Research
- Oil & Gas
- Paper & Pulp Industry
- Power Generation
- Other
- Workpiece Materials Covered
- Cast Irons
- Carbon Steels
- Stainless Steels
- High-Temperature/Super Alloys
- Hardened Materials
- Non-Ferrous Metals
- Geographic Coverage
- Volume I: Executive Summary
- Section One: Technology Overview
- Global Technological Environment
- International Standards
- Ansi Standards
- Iso (International Standards Organization) Standards
- Jis, Afnor, Bsi, Din, Uni, Sacs And Cam
- Product Definitions
- Indexable Inserts
- General Terminology
- Geometry
- Coatings
- Solid Cutting Tools
- Milling Tools By Type
- Turning Tools By Type
- Drilling Tools By Type
- Micromachining Tools
- Other Tools (E.G., Reamers, Burrs, Etc.)
- Cutting Tool Selection
- Application Definition
- Specifications
- Workpiece Material Evaluation
- Developments In Cutting Tool Grades
- Trends In General Materials Science
- Sintered Tools
- Brazed Tools
- Insert Technology Overview
- General Terminology
- Insert Geometry
- Coatings Overview
- Coatings: Changing The Face Of Tooling
- Ceramic Coatings
- Tin, Ticn, Tic, Ticn, Tialn
- Diamond Coatings
- Advances In Coatings Technology
- Tial Black And Gold Developments
- Diamond-Like-Carbon (Dlc) Developments
- Nanostructured Materials
- Impact On Tooling And Productivity
- Coatings Processes
- Cvd (Chemical Vapor Deposition)
- Pvd (Physical Vapor Deposition)
- Developments In Coatings Technology
- Advances In General Machining Processes
- Cutting Tool Versus Machine Tool Development
- Knowledge Gap: Education On Tool Selection And Machine Capability
- Consultant Tool Specialists Create Cottage Industry
- Impact Of Advances In Cutting Tool Grade Technology
- Adjusting To Ceramic Versus Tungsten Carbide Tooling
- Impacts Of Advances In Workpiece Material
- Automotive Industry Increases Use Of Aluminum
- Aerospace Industry And Hardened Materials
- Developments In Machine Tool Design And Construction
- Quick-Change Tooling
- Multitasking Lathes
- Modular Tooling
- High-Speed Machining
- Coolant Based Machining
- Dry Machining
- Environmental Impact
- Hard Turning
- Powder Metallurgy
- Technology Outlook
- Cutting Tool Technology On The Horizon
- Advances In Materials Science Offer Both Challenges And Measurable Productivity Gains
- Nanostructured Materials
- Ultrafine Grain (Micrograin) Carbides
- Ceramics
- Increasing Productivity With New Designs
- Section Two: Market Overview
- Global Cutting Tools Market Overview Introduction
- Global Industry Trends
- Cutting Tool Versus Machine Tool Development
- World Machining Industry By Product Type ($Mm): 2005- 2010
- Machine Tools
- Cutting Tools
- Machine Tools Industry Overview
- General Trends In Manufacturing
- End-User Strategies In Reducing Cost
- Offsetting Increasing Labor Costs
- Global Demand ($Mm) For Machine Tools By Region And Type: 2005-2010
- General Machining
- Milling/Turning
- Screw Machining
- Swiss Style
- Trends In Machine Tool Productivity Designs
- Quick-Changing
- Multitasking Lathe Concept
- Impacts Of Just-In-Time Practices
- Economics Of Machining
- Economics Of High-Speed Machining
- Economic Benefits Of Dry Machining
- Impacts Of Advances In Workpiece Material
- Productivity And Manufacturing Research
- Super Alloys
- Relevant Legislation
- Waste Removal
- Coolant Use And Disposal
- Work Environment
- Coatings Market Overview
- Global Demand ($Mm) For Coatings: 2005-2010
- Global Demand ($Mm) By Coated Versus Uncoated Cutting Tools By Tool Type: 2005-2010
- Global Demand ($Mm) By Coating Type: 2005-2010
- Nanostructured Materials Coatings
- Cutting Tools Industry Analysis
- Global Demand ($Mm) For Cutting Tools By Region: 2005- 2010
- Regional Trends
- Manufacturing Trends
- Product Market Overview
- Global Demand ($Mm) For Cutting Tools By Type-solid Versus Indexable Tooling: 2005-2010
- Global Demand ($Mm) For Cutting Tools By Product Type: Milling, Turning, Drilling & Other: 2005-2010
- Product Trends
- Distribution Channels
- Global Demand ($Mm) By Distribution Channel: 2005- 2010
- Global Demand ($Mm) For Cutting Tools By Workpiece Material: 2005-2010
- Product Grade Overview
- Cutting Tool Grade Trends
- Global Demand ($Mm) For Cutting Tools By Grade: 2005- 2010
- Carbide Tools Ceramic Tools Cermet Tools
- Cbn/Pcbn Tools
- Diamond Tools
- Advantages Of Ceramic Tools
- Solid Ceramic Tools, Alumina
- Sic (Silicon Carbide), Sin (Silicon Nitride)
- Sic Whisker Reinforced Tools
- Cmc (Ceramic Matrix Composites)
- Advanced Tooling
- Cutting Tool Grade Technology
- Brazed Tools
- Micromachined Tools
- Global Demand ($Mm) For Micromachined Tools: 2005- 2010
- Advances And Market Growth In Small-Part Machining
- Custom Tool Market
- End-User Analysis
- Global Demand ($Mm) By End-User: 2005-2010
- World Competitive Environment
- Competitive Market Factors
- Supplier Trends And Market Share ($Mm)
- Industry Trends And Forecasts
- General Conclusions
- High-Growth Markets
- Volume Ii: Global Cutting Tools Industry Analysis By Product
- Section Three: Milling
- General Market Trends
- Global Demand ($Mm) For Milling Tools: 2005-2010
- Global Demand ($Mm) By Country: 2005-2010
- Trends By Region
- Tool Type: Solid/Indexable
- Milling Tool Market By Tool Type: Indexable Versus Solid Global Demand ($Mm) For Milling Tools By Tool Type: 2005-2010
- Indexable Solid
- Trends In Solid Versus Indexable Tooling
- Milling Tool Market By Product Type
- Global Demand ($Mm) For Milling Tools By Product Type: 2005-2010
- End/Face Milling Slotting/Slitting
- Plunge Milling Contouring Profiling
- Threading Micromachining
- Forecasts & Trends In Product Type
- Workpiece Material
- Global Demand ($Mm) By Workpiece Material: 2005-2010
- End-User Trends By Workpiece Material
- Cutting Tool Grade
- Global Demand ($Mm) By Grade: 2005-2010
- Industry Trends And Forecasts
- General Conclusions
- High-Growth Markets
- Section Four: Turning Tools
- General Market Trends
- Global Demand ($Mm) For Turning Tools
- Global Demand ($Mm) By Country
- Trends By Region
- Tool Type: Indexable
- Market By Tool Type: Indexable Versus Solid
- Global Demand ($Mm) For Turning Tools By Type: 2005- 2010
- Indexable Solid
- Advances In Insert Design And Application
- Turning Tool Market By Product Type
- Global Demand ($Mm) For Turning Tools By Type: 2005- 2010
- Iso Turning
- Parting/Grooving
- Threading
- Profiling
- Micromachining
- Forecasts & Trends In Product Type
- Workpiece Material
- Global Demand ($Mm) By Workpiece Material: 2005-2010
- End-User Trends By Workpiece Material
- Cutting Tool Grade
- Global Demand ($Mm) By Grade: 2005-2010
- Material Advances Increase Efficiency
- Industry Trends And Forecasts
- General Conclusions
- High-Growth Markets
- Section Five: Drilling Tools
- General Market Trends
- Global Demand ($Mm) For Drilling Tools
- Global Demand ($Mm) By Country
- Trends By Region
- Tool Type: Indexable/Solid
- Market By Product Type: Indexable Versus Solid
- Global Demand ($Mm) For Drilling Tools By Tool Type: 2005-2010
- Indexable Solid
- Trends In Indexable Drilling
- Drilling Tool Market By Product Type
- Global Demand ($Mm) For Drilling Tools By Type: 2005- 2010
- Standard Depth Drilling
- Deep Hole Drilling
- Threading
- Micromachining
- Workpiece Material
- Global Demand ($Mm) By Workpiece Material: 2005-2010
- End-User Trends By Workpiece Material
- Cutting Tool Grade
- Global Demand ($Mm) By Grade: 2005-2010
- Industry Trends And Forecasts
- General Conclusions
- High-Growth Markets
- Volume Iii: End-User Industry Analysis By Country
- Sections Three To Eighteen
- Section Three: China
- Section Four: United States
- Section Five: Germany
- Section Six: Japan
- Section Seven: Korea
- Section Eight: Italy
- Section Nine: France
- Section Ten: Taiwan
- Section Eleven: United Kingdom
- Section Twelve: Brazil
- Section Thirteen: Other Eu
- Section Fourteen: Other Nafta
- Section Fifteen: Other Europe
- Section Sixteen: Other Asia/Pacific
- Section Seventeen: Other Latin America
- Section Eighteen: Rest Of World
- Each Country Is Analyzed In Detail By The Following Criteria:
- General Market Conditions
- Total Demand By Country For Cutting Tools ($Mm): 2005- 2010
- Trends & Forecasts In Cutting Tool Consumption
- Factors Affecting Cutting Tool Demand
- Developments In Machining
- Total Demand ($Mm) For Machine Tools: 2005-2010
- Trends & Forecasts
- Machine Tool Design And Productivity
- Raw Materials
- Key Market Trends By End-User Industry
- Total Demand For Cutting Tools ($Mm) By End-User Industry: 2005-2010
- Automotive, Electronics, General Machining, Construction, Aerospace, Medical/Research, Communications, Oil/Gas, Chemical Processing, Pulp & Paper Industry, Defense/Military, Power Generation
- Statistics & Overall Market
- Percentage Gdp
- Installed Manufacturing Base
- Growth Levels
- Key Sectors
- Production Capabilities
- Key Producers By Industry
- Government Regulation/Associations
- Country Analysis By Tool Type
- Demand ($Mm) By Cutting Tool Type: 2005-2010
- Indexable Solid
- Analysis By Product Type
- Demand ($Mm) By Cutting Tool Product Type: 2005-2010
- Milling
- Turning
- Drilling
- Other
- Competitive Environment
- Competitive Market Factors (E.G., Pricing, Product Development...)
- Marketing Strategies
- Industry Trends And Forecasts
- High-Growth Markets (Cagr By Year)
- General Conclusions
- Volume Iv: Competitive Analysis Of Producers
- Section Three: Competitive Environment
- Competitive Environment
- Supplier Sales And Market Share ($Mm)
- Competitive Market Factors (E.G., Pricing, Product Development...)
- Marketing Strategies Section Four: Producer Profiles
- Each Profile Contains The Following Categories
- Ownership
- Company Background
- Key Employees
- Total Employees (#)
- Products/Services
- Cutting Tool Revenue ($Mm 2003, 2004)
- Distribution Channels
- Key Markets
- Marketing Strategy
- Suppliers Profiled
- Advent Tool And Manufacturing, Inc.
- Allegheny Technologies, Inc.
- Allegheny/Firth Sterling
- Allegheny/Landis Threading
- Allegheny/Stellram
- Aloris Tool Technology Co., Inc.
- Asahi Diamond Industrial Uk Co. Ltd.
- Balax, Inc.
- Balzers, Inc.
- Bohlerit
- Carbide Processors/Northwest Research Institute
- Ceramtec North America
- Ceratizit South Carolina
- Crystallume, Inc.
- Cvd Diamond Corp.
- Dapra Corp.
- Dijet Industrial Co., Ltd.
- Greenleaf Corp.
- Guhring, Inc.
- Ham Precision Tools, Inc.
- Hardinge, Inc.
- Ingersoll Cutting Tool, Inc.
- Iscar Metals, Inc. (Imc)
- J & M Diamond Tool, Inc.
- Kennametal
- Kennametal/Rogers Tool Works
- Kieninger Gmbh
- Komet Of America, Inc.
- Korloy, Inc.
- Kyocera Industries Ceramics/Ceratip
- Kyocera Tycom Corp.
- Landis Gardner
- Lmt-Fette, Inc.
- Mitsubishi Materials Usa Corp.
- Morse Cutting Tools
- Nachi-America, Inc
- Newcomer Products, Inc.
- Niagara Cutter (N.C. Industries, Inc.)
- Ntk Cutting Tools
- Osg Tap & Die, Inc.
- Paul Horn Usa, Inc.
- Sandvik Ab
- Schumacher Gmbh & Co. Kg
- Seco Tools Ab
- Sgs Tool Co.
- Sp3, Inc.
- Sumitomo Electric Industries, Ltd..
- Technodiamant Usa, Inc.
- Tungaloy Corporation.
- Valenite, Inc.
- Walter Ag
About this Product
Delivery Details
PDF:
PRINT/CD-ROM:
Related Products
- Coal, Iron and Increasing Inflation Fuel Rise in Australian Export Prices >>
- High Demand and Strong Investments saw the Global Steel Industry rise 5.7% in the First Half of 2008 >>
- Global Manufacturers’ spend on Warranty Management Solutions tipped to exceed $1bn >>
- Demand for Specialist Footwear Increases >>
Industry & Manufacturing
- Aerospace
- Agriculture
- Chemicals Industry
- Company Reports (Industry & Manufacturing)
- Construction
- Contractors & Engineers
- Country Overviews (Industry & Manufacturing)
- Defence
- Environmental Services
- Glass
- Machinery
- Manufacturing Finance
- Metals
- Mining
- Misc. Industry & Manufacturing
- Packaging
- Plant / Heavy Equipment
- Plastics
- Pulp & Paper
- Rubber
- Textiles
- Wire & Cable
- Wood
call +44 (0) 20 7060 7474
or email us
Resources
Why Report Buyer?
Advertising/Affiliates
View Our Publishers
News
About Us
Market Publishers
Meet Us
Jobs
Contact Us
Categories and Subcategories











