U.S. Market for Dental Prosthetics and CAD/CAM Devices 2009

Publication Date	March 2009
Publisher	iData Research
Product Type	Report
Pages	200
ISBN Number	not applicable
Product Code	IDR00109

Buy this product or for assistance call +44 20 7060 7474

PDF £4,505.00$7494 | €5042

PRINT £4,205.00$6995 | €4706

FAX Order above formats by FAX

Summary

In 2008, there were over 60 million units of dental prosthetic devices sold. While the growth rate has declined due to the economic recession in 2008 and is expected to continue declining late into 2009, this number is expected to steadily recover, reaching over 80 million by the end of the forecast period. The number of patients requiring dental restorations is increasing, especially as baby boomers age. In addition, Americans are becoming more concerned with their appearance, and hence, dentists are performing more cosmetically-driven procedures.

Content

Executive Summary
- 1.1 Overview: Market for Dental Prosthetics
- 1.2 Market for Crowns and Bridges
- 1.3 Crowns and Bridges Market Segmentation
- 1.4 Market for Inlays and Onlays4
- 1.5 Market for Veneers
- 1.6 Market for Dentures
- 1.7 Market for Cad/Cam Systems, Blocks, and Prosthetics
- 1.8 Digital Impression Taking Systems
- 1.9 Competitive Analysis
  - 1.9.1 Leading Laboratories10
  - 1.9.2 Leading Cad/Cam Competitors
Research Methodology
- 2.1 Research Scope12
- 2.2 Idata's 9-Step Methodology12
  - Step 1: Project Initiation & Team Selection13
  - Step 2: Prepare Data Systems and Perform Secondary Research
  - Step 3: Preparation for Interviews & Questionnaire Design15
  - Step 4: Performing Primary Research
  - Step 5: Research Analysis: Establishing Baseline Estimates18
  - Step 6: Market Forecast and Analysis
  - Step 7: Identify Strategic Opportunities20
  - Step 8: Final Review and Market Release
  - Step 9: Customer Feedback and Market Monitoring
Overview of Dental Prosthetics
- 3.1 Introduction to Dental Prosthetic Devices
  - 3.1.1 Statistics on Dental Health in The U.S
- 3.2 Crowns and Bridges
  - 3.2.1 Crowns
  - 3.2.2 Bridges
  - 3.2.3 Material Types
    - 3.2.3.1 Full-Cast Crowns and Bridges
    - 3.2.3.2 Porcelain-Fused Metal: Semi-Precious and Precious Alloys
    - 3.2.3.3 Porcelain-Fused Metal: Non-Precious Alloys
    - 3.2.3.4 All-Ceramic Devices27
- 3.3 Inlays and Onlays28
  - 3.3.1 Material Types
    - 3.3.1.1 Gold
    - 3.3.1.2 Porcelain
    - 3.3.1.3 Composite Resin
- 3.4 Veneers
  - 3.4.1 Material Types
    - 3.4.1.1 Porcelain
    - 3.4.1.2 Composite Resin
- 3.5 Dentures
  - 3.5.1 Full Dentures
  - 3.5.2 Partial Dentures30
- 3.6 Manufacturing Process and Technological Developments
  - 3.6.1 Conventional Fabrication
  - 3.6.2 Cad/Cam Technology31
  - 3.6.3 Three-Dimensional Printing31
  - 3.6.4 Digital Impression-Taking
Total Market for Dental Prosthetics
- 4.1 Introduction33
- 4.2 Market Analysis and Forecast
- 4.3 Market Segmentation
  - 4.3.1 Market Value by Prosthetics Type
  - 4.3.2 Units Sold by Prosthetics Type39
  - 4.3.3 Effects of The Economic Crisis
- 4.4 The Market for Dental Implant Prosthetics
  - 4.4.1 Introduction
  - 4.4.2 Dental Implant Penetration in The Market for Dental Prosthetics42
- 4.5 Market Drivers
  - 4.5.1 New Technologies44
  - 4.5.2 Outsourcing
  - 4.5.3 Demand for Improved Aesthetics
  - 4.5.4 Demographic Factors45
- 4.6 Market Limiters46
  - 4.6.1 Labor Costs
  - 4.6.2 Improved Oral Hygiene
  - 4.6.3 Economic Factors46
- 4.7 Competitive Analysis
- 4.8 Mergers and Acquisitions
  - 4.8.1 Nobel Biocare Acquisition of Biocad and Alliance with Optimet
Crowns and Bridges Market
- 5.1 Introduction51
- 5.2 Market Analysis and Forecast
- 5.3 Market for Crowns55
  - 5.3.1 Market Analysis and Forecast
    - 5.3.1.1 Units Sold
    - 5.3.1.2 Average Selling Price
- 5.4 Market for Bridges58
  - 5.4.1 Market Analysis and Forecast
    - 5.4.1.1 Units Sold
    - 5.4.1.2 Average Selling Price
- 5.5 Market Segmented by Material Type
  - 5.5.1 Full-Cast65
  - 5.5.2 All-Ceramic
  - 5.5.3 Porcelain-Fused Metal: Non-Precious Alloys
  - 5.5.4 Porcelain-Fused Metal: Semi-Precious Alloys
  - 5.5.5 Porcelain-Fused Metal: Precious Alloys
- 5.6 Market Drivers
  - 5.6.1 Improvements in Dental Health
  - 5.6.2 New Technologies72
  - 5.6.3 Improving Track Record of All-Ceramics
  - 5.6.4 Cosmetics
- 5.7 Market Limiters73
  - 5.7.1 Improvements in Dental Health
  - 5.7.2 Current Economic Downturn
  - 5.7.3 Implant Based Restorations
- 5.8 Competitive Analysis
Inlays and Onlays Market
- 6.1 Introduction75
- 6.2 Market Analysis and Forecast
  - 6.2.1 Units Sold
  - 6.2.2 Average Selling Price79
- 6.3 Market Segmented by Material Type
  - 6.3.1 Gold
  - 6.3.2 Porcelain
  - 6.3.3 Composite Resin80
- 6.4 Market Drivers
  - 6.4.1 Chairside Cad/Cam Technology
- 6.5 Market Limiters83
  - 6.5.1 Economic Factors83
- 6.6 Competitive Analysis
Veneers Market84
- 7.1 Introduction84
- 7.2 Market Analysis and Forecast
  - 7.2.1 Units Sold
  - 7.2.2 Average Selling Price87
- 7.3 Market Segmented by Material Type
  - 7.3.1 Porcelain
  - 7.3.2 Composite Resin88
- 7.4 Market Drivers
  - 7.4.1 Demand for Improved Aesthetics
- 7.5 Market Limiters90
  - 7.5.1 Price
  - 7.5.2 Alternative Procedures90
- 7.6 Competitive Analysis
Dentures Market
- 8.1 Introduction92
- 8.2 Market Analysis and Forecast
  - 8.2.1 Units Sold
  - 8.2.2 Average Selling Price95
- 8.3 Market Segmented by Type
  - 8.3.1 Full Dentures
  - 8.3.2 Partial Dentures96
- 8.4 Market for False Teeth
  - 8.4.1 Market Analysis and Forecast
  - 8.4.2 Units Sold
  - 8.4.3 Average Selling Price100
- 8.5 Market Segmented by Material Type
  - 8.5.1 Acrylic
  - 8.5.2 Porcelain
  - 8.5.3 Composite Resin101
- 8.6 Market Drivers
  - 8.6.1 Demographic Factors103
  - 8.6.2 Mini-Implants with Dentures
  - 8.6.3 Growth of Corporate Dental Chains
- 8.7 Market Limiters104
  - 8.7.1 Improvements in Dental Health
- 8.8 Competitive Analysis
Cad/Cam Systems Market106
- 9.1 Introduction106
- 9.2 Market for in-Lab Cad/Cam Systems
  - 9.2.1 Full in-Lab Systems
    - 9.2.1.1 Market Analysis and Forecast
    - 9.2.1.2 Competitive Analysis
  - 9.2.2 Standalone Scanner Cad/Cam Systems
    - 9.2.2.1 Competitive Analysis
  - 9.2.3 in-Lab Cad/Cam Systems Competitive Analysis
- 9.3 Market for Chairside Cad/Cam Systems
  - 9.3.1 Market Analysis and Forecast
  - 9.3.2 Competitive Analysis: Chairside Systems
- 9.4 Market Drivers
  - 9.4.1 Demand for All-Ceramic Restorations133
  - 9.4.2 Shortage of Skilled Labor133
  - 9.4.3 Decreasing Prices
  - 9.4.4 Technological Improvements
- 9.5 Market Limiters134
  - 9.5.1 Pfm Restorations134
  - 9.5.2 Three-Dimensional Printing Technology134
  - 9.5.3 Cost of Investment
  - 9.5.4 Technological Limitations
  - 9.5.5 Economic Downturn136
- 9.6 Competitive Analysis
  - 9.6.1 Full Cad/Cam Systems
  - 9.6.2 Standalone Scanner Cad/Cam Systems
  - 9.6.3 Chairside Cad/Cam Systems
  - 9.6.4 Overall Cad/Cam Systems
Cad/Cam Blocks and Prosthetic Devices Market
- 10.1 Introduction139
- 10.2 Market Analysis for Cad/Cam Blocks140
  - 10.2.1 Market Analysis and Forecast
  - 10.2.2 Units Sold
  - 10.2.3 Average Selling Price142
  - 10.2.4 Market Segmented by Material Type
    - 10.2.4.1 Zirconia
    - 10.2.4.2 Porcelain
    - 10.2.4.3 Acrylic143
  - 10.2.5 Competitive Analysis
- 10.3 Market for Cad/Cam Prosthetics
  - 10.3.1 Chairside Prosthetic Devices
    - 10.3.1.1 Market Analysis and Forecast
    - 10.3.1.2 Competitive Analysis: Chairside Prosthetics
  - 10.3.2 in-Lab Prosthetic Devices
    - 10.3.2.1 Market Analysis and Forecast
    - 10.3.2.2 Competitive Analysis: in-Lab Prosthetics
  - 10.3.3 Penetration Rates
- 10.4 Market Drivers
  - 10.4.1 Improving Track Record of All-Ceramic Restorations157
- 10.5 Market Limiters157
  - 10.5.1 Initial Investment into Cad/Cam Systems157
  - 10.5.2 Adoption of Cad/Cam Technology
Digital Impression-Taking Systems Market
- 11.1 Introduction158
- 11.2 Market Analysis and Forecast
  - 11.2.1 Units Sold
  - 11.2.2 Average Selling Price161
- 11.3 Market Drivers
  - 11.3.1 Productivity Enhancements
  - 11.3.2 Affordable Alternative
- 11.4 Limiters
  - 11.4.1 Hesitance of Early Majority Practitioners163
- 11.5 Competitive Analysis
Competitors in The Market for Automated Prosthetic Manufacturing
- 12.1 Introduction165
- 12.2 Cad/Cam Systems
  - 12.2.1 3m Espe
  - 12.2.2 3shape A/S
  - 12.2.3 D4d Technologies, Llc166
  - 12.2.4 Dental Wings
  - 12.2.5 Dentsply International166
  - 12.2.6 Etkon Ag167
  - 12.2.7 Kavo Dental Corporation
  - 12.2.8 Nobel Biocare167
  - 12.2.9 Noritake Dental Supply
  - 12.2.10 Sirona Dental Systems
  - 12.2.11 Wieland Dental and Technik
- 12.3 Digital Impression Taking Systems
  - 12.3.1 Cadent
  - 12.3.2 3m Espe
- 12.4 Rapid Prototyping Systems
  - 12.4.1 Imagen
  - 12.4.2 3D Systems
Abbreviations
List of Figures
- Executive Summary
- Research Methodology
- Overview of Dental Prosthetics
- Total Market for Dental Prosthetics
  - Figure 4-1: Market for Dental Prosthetics, U.S., 2005 - 2015
  - Figure 4-2: Market Shares by Prosthetics Type, U.S., 2005 - 2015
  - Figure 4-3: Unit Shares by Prosthetics Type, 2005 - 2015
  - Figure 4-4: Number of Dental Implant Prosthetic Devices, U.S., 2005 - 2015
  - Figure 4-5: Market Drivers and Limiters for Dental Prosthetics, U.S., 2008
  - Figure 4-6: Leading Competitors in The Market for Dental Prosthetics, U.S.,2007
- Crowns and Bridges Market
  - Figure 5-1: Market for Crowns and Bridges, U.S., 2005 - 201553
  - Figure 5-2: Market for Crowns, U.S., 2005 - 2015
  - Figure 5-3: Market for Bridges, U.S., 2005 - 2015
  - Figure 5-4: Crowns and Bridges Segmented by Material Type, U.S., 2005 - 2015
  - Figure 5-5: Crowns and Bridges Segmented by Material Type, U.S., 2005 - 2015
  - Figure 5-6: Market for Full-Cast Crowns and Bridges, U.S., 2005 - 2015
  - Figure 5-7: Market for All-Ceramic Crowns and Bridges, U.S., 2005 - 201568
  - Figure 5-8: Market for Pfm Non-Precious Alloy Crowns and Bridges, U.S., 2005- 201569
  - Figure 5-9: Market for Pfm Semi-Precious Alloy Crowns and Bridges, U.S.2005 - 2015
  - Figure 5-10: Market for Pfm Precious Alloy Crowns and Bridges, U.S., 2005 -2015
  - Figure 5-11: Market Drivers and Limiters, Crowns and Bridges, U.S., 2008
  - Figure 5-12: Leading Competitors in The Market for Crowns and Bridges, U.S.,2008
- Inlays & Onlays Market
  - Figure 6-1 - Market for Inlays and Onlays, U.S., 2005 - 2015
  - Figure 6-2: Market for Inlays and Onlays Segmented by Type, U.S., 2005 -2015
  - Figure 6-3 Inlays and Onlays Segmented by Material Type, U.S., 2005 - 2015
  - Figure 6-4 Leading Competitors in The Market for Inlays/Onlays, U.S., 2008
- Veneers Market84
  - Figure 7-1: Market for Veneers, U.S., 2005 - 201585
  - Figure 7-2 - Market for Veneers Segmented by Type, U.S., 2005 - 2015
  - Figure 7-3 - Veneers Unit Share by Material Type, U.S., 2005 - 2015
  - Figure 7-4 - Market Drivers and Limiters, Veneers, U.S., 2008
  - Figure 7-5 Leading Competitors in The Market for Veneers, U.S., 200891
- Dentures Market
  - Figure 8-1: Market for Dentures, U.S., 2005 - 2015
  - Figure 8-2: Dentures Segmented by Type, U.S., 2005 - 2015
  - Figure 8-3: Market for Dentures Segmented by Type, U.S., 2005 - 201597
  - Figure 8-4: Market for Denture False Teeth, U.S., 2005 - 201598
  - Figure 8-5 Market for Denture False Teeth Segmented by Type, U.S., 2005 -2015
  - Figure 8-6 Denture False Teeth Segmented by Material Type, U.S., 2005 -2015
  - Figure 8-7 - Market Drivers and Limiters, Dentures, U.S., 2008104
  - Figure 8-8: Leading Competitors in The Market for Dental Prosthetics, U.S.,2008
  - Figure 8-9: Leading Competitors in The Market for False Teeth, U.S., 2008
- Cad/Cam Systems Market106
  - Figure 9-1: Market for Full in-Lab Cad/Cam Systems, U.S., 2005 - 2015
  - Figure 9-2: Number of Full in-Lab Cad/Cam Systems, U.S., 2005 - 2015
  - Figure 9-3: Leading Competitors, Full in-Lab Cad/Cam Systems, U.S., 2008115
  - Figure 9-4: Market for Standalone Scanner in-Lab Cad/Cam Systems, U.S.,2005 - 2015
  - Figure 9-5: Number of Standalone Scanner Cad/Cam Systems, U.S., 2005 -2015
  - Figure 9-6: Leading Competitors, Standalone Scanner Cad/Cam Systems, U.S.,2008
  - Figure 9-7: Total Market Share of in-Lab Cad/Cam Systems, U.S., 2008
  - Figure 9-8: Market for Chairside Cad/Cam Systems, U.S., 2005 - 2015
  - Figure 9-9: Number of Chairside Cad/Cam Systems, U.S., 2005 - 2015
  - Figure 9-10: Share of Chairside Cad/Cam Systems Sold Annually, U.S., 2005 -2015
  - Figure 9-11: Share of Total Chairside Cad/Cam Systems Sold, U.S., 2005 -2015
  - Figure 9-12: Market Drivers and Limiters, Cad/Cam, U.S., 2008
  - Figure 9-13: Total Market Share of Cad/Cam Systems, U.S., 2008138
  - Cad/Cam Blocks and Prosthetic Devices Market
  - Figure 10-1: Market for Cad/Cam Blocks, U.S., 2005 - 2015140
  - Figure 10-2: Market for Cad/Cam Blocks Segmented by Type, U.S., 2005 -2015
  - Figure 10-3: Leading Competitors, Cad/Cam Blocks, U.S., 2008
  - Figure 10-4: Market for Chairside Cad/Cam Prosthetic Devices, U.S., 2005 -2015
  - Figure 10-5: Leading Competitors, Cad/Cam Prosthetic Devices, U.S., 2008
  - Figure 10-6 - Market for in-Lab Cad/Cam Prosthetic Devices, U.S., 2005 -2015
  - Figure 10-7: Leading Competitors, in-Lab Cad/Cam Prosthetic Devices, U.S.,2008
  - Figure 10-8: Percentage of Prosthetic Devices Fabricated with Cad/Cam
  - Technology vs. Conventional Methods, U.S., 2005 - 2015
  - Digital Impression-Taking Systems
  - Figure 11-1: Market for Digital Impression Taking Systems, U.S., 2005 - 2015
  - Figure 11-2: Number of Digital Impression Taking Systems, U.S., 2005 - 2015
  - Figure 11-3: Market Drivers and Limiters, Digital Impression Taking Systems,U.S., 2008
  - Figure 11-4: Leading Competitors, Digital Impression Taking Systems, U.S.,2008
- Abbreviations
List of Charts
- Executive Summary
  - Chart 1-1: Market for Dental Prosthetics, U.S., 2005 - 20151
  - Chart 1-2: Dental Prosthetics Unit Share by Type, U.S., 2005 - 20152
  - Chart 1-3: Market for Crowns and Bridges Segmented by Material Type, U.S.,2005 - 2015
  - Chart 1-4: Market for Inlays and Onlays Segmented by Material Type, U.S., 2005- 20154
  - Chart 1-5: Market for Veneers, U.S., 2005 - 2015
  - Chart 1-6: Dentures Unit Share by Type, U.S., 2005 - 2015
  - Chart 1-7: Percentage of Prosthetic Devices Fabricated with Cad/Cam
  - Technology vs. Conventional Methods, U.S., 2005 - 2015
  - Chart 1-8: Market for Digital Impression Taking Systems, U.S., 2005 - 2015
  - Chart 1-9: Market Share for in-Lab Cad/Cam Systems, U.S., 200811
- Research Methodology
- Overview of Dental Prosthetics
  - Chart 3-1: Prevalence of Coronal Caries among Dentate Adults in The U.S
  - Chart 3-2: Mean Number of Teeth among Dentate Adults in The U.S
  - Chart 3-3: Prevalence of Edentulism among Dentate Adults in The U.S
- Total Market for Dental Prosthetics
  - Chart 4-1: Dental Prosthetics Market Value, U.S., 2005 - 2015
  - Chart 4-2: Market Shares by Prosthetics Type, U.S., 2008
  - Chart 4-3: Market Shares by Prosthetics Type, U.S., 2005 - 2015
  - Chart 4-4: Unit Shares by Prosthetics Type, U.S., 2008
  - Chart 4-5: Unit Shares by Prosthetics Type, U.S., 2005 - 201541
  - Chart 4-6: Implant Prosthetics Unit Shares, U.S., 2005 - 2015
  - Chart 4-7: Leading Competitors in The Market for Dental Prosthetics, U.S., 2008
- Crowns and Bridges Market
  - Chart 5-1: Crowns and Bridges Market Value, U.S., 2005 - 2015
  - Chart 5-2: Number of Crown Units Sold, U.S., 2005 - 2015
  - Chart 5-3: Average Selling Price per Crown Unit, U.S., 2005 - 2015
  - Chart 5-4: Number of Units of Bridges Sold, U.S., 2005 - 2015
  - Chart 5-5: Average Selling Price per Bridge Unit, U.S., 2005 - 2015
  - Chart 5-6: Crowns and Bridges Units Segmented by Material Type, U.S., 200863
  - Chart 5-7: Crowns and Bridges Segmented by Material Type, U.S., 2005 - 201564
- Inlays and Onlays Market
  - Chart 6-1: Market and Growth Rates for Inlays and Onlays, U.S., 2005 - 2015
  - Chart 6-2: Number of Inlay and Onlay Units Sold, U.S., 2005 - 2015
  - Chart 6-3: Average Selling Price per Inlay and Onlay Unit, U.S., 2005 - 2015
  - Chart 6-4: Inlays and Onlays Market Segmented by Material Type, U.S., 2005 -2015
- Veneers Market84
  - Chart 7-1: Veneer Units Segmented by Material Type, U.S., 200884
  - Chart 7-2: Number of Veneer Units Sold, U.S., 2005 - 201586
  - Chart 7-3: Average Selling Price per Veneer Unit, U.S., 2005 - 2015
- Dentures Market
  - Chart 8-1: Denture Units Segmented by Type, U.S., 200892
  - Chart 8-2: Number of Denture Units Sold, U.S., 2005 - 2015
  - Chart 8-3: Average Selling Price per Denture Unit, U.S., 2005 - 2015
  - Chart 8-4 Market and Growth Raters for Denture False Teeth, U.S., 2005 -2015
- Dental Cad/Cam Systems Market
  - Chart 9-1: Market for Full in-Lab Cad/Cam Systems, U.S., 2005 - 2015
  - Chart 9-2: Number of Full in-Lab Cad/Cam Systems Sold Annually, U.S., 2005- 2015
  - Chart 9-3: Total Number of Full in-Lab Cad/Cam Systems Sold, U.S., 2005 -2015
  - Chart 9-4: Leading Competitors, Full in-Lab Cad/Cam System Units, U.S.,2008
  - Chart 9-5: Market Value for Standalone Scanner Cad/Cam Systems, U.S., 2005-2015
  - Chart 9-6: Number of Standalone Scanner Cad/Cam Systems Sold Annually,U.S., 2005 - 2015120
  - Chart 9-7: Total Number of Standalone Scanner Cad/Cam Systems Sold, U.S.,2005 - 2015
  - Chart 9-8: Leading Competitors, Standalone Scanner Cad/Cam Systems, U.S.,2008
  - Chart 9-9: Total Market Share of in-Lab Cad/Cam Systems, U.S., 2008125
  - Chart 9-10: Market Value, Chairside Cad/Cam Systems, U.S., 2005 - 2015
  - Chart 9-11: Number of Chairside Cad/Cam Systems Sold Annually, U.S., 2005- 2015
  - Chart 9-12: Total Number of Chairside Cad/Cam Systems Sold, U.S., 2005 -2015
  - Chart 9-13: Percent of Chairside Cad/Cam Systems Sold Annually, U.S., 2005- 2015
  - Chart 9-14: Percentage of Total Chairside Cad/Cam Systems Sold, U.S., 2005 -2015
  - Chart 9-15: Total Market Share of Cad/Cam System, U.S., 2008
- Cad/Cam Blocks and Prosthetic Devices Market
  - Chart 10-1: Number of Cad/Cam Blocks Sold, U.S., 2005 - 2015141
  - Chart 10-2: Average Selling Price per Cad/Cam Block, U.S., 2005 - 2015142
  - Chart 10-3: Cad/Cam Blocks Segmented by Type, U.S., 2005 - 2015145
  - Chart 10-4: Market for Chairside Cad/Cam Prosthetic Devices, U.S., 2005 -2015
  - Chart 10-5: Market for in-Lab Cad/Cam Prosthetic Devices, U.S., 2005 -2015
  - Chart 10-6: Leading Competitors, in-Lab Cad/Cam Prosthetic Devices, U.S.,2008
  - Chart 10-7: Percentage of Prosthetic Devices Fabricated with Cad/Cam
  - Technology vs. Conventional Methods, U.S., 2005 - 2015
  - Digital Impression-Taking Systems Market
  - Chart 11-1: Number of Digital Impression Taking Systems Sold, U.S., 2005 -2015
  - Chart 11-2 Average Selling Price per Digital Impression Taking System, U.S.,2005 - 2015
Competitors in The Market for Automated Prosthetic Manufacturing
Abbreviations