51 reports

  • METAL INJECTION MOLDING PROCESS
  • 6.2 METAL INJECTION MOLDING PROCESS

Growing demand from end-use industries in emerging economies is driving the growth of the metal injection molding market The metal injection molding market is estimated to be USD 2.58 billion in 2017 and is projected to reach USD 3.77 billion by 2022, at a CAGR of 7.83% from 2017 to 2022. The growth of this market can be...

  • Injection Molding
  • North America
  • United States
  • World
  • Market Size
  • Injection molding in medical technology
  • Aluminum metal injection molding

About Injection Molding Machine Injection molding is the most commonly used manufacturing process for the fabrication of plastic parts. Injection molding is used to manufacture a wide variety of products, which vary considerably in their dimensions, complex structures, and end-use applications. The injection molding is done by an injection...

  • Injection Molding
  • Motor Vehicle
  • World
  • Demand
  • Market Size
  • ALUMINUM METAL INJECTION MOLDING PROMISING NEW OPPORTUNITIES
  • GROWING USE OF LEADING-EDGE PROCESS CONTROL AND MONITORING SYSTEMS FOR INJECTION MOLDING

About the Powder Injection Molding (PIM) The powder injection molding (PIM) technique was invented by Dr. Raymond Wiech in the US in the 1970s. Though the PIM process is a simple concept, it is complex in real-time operations. The use of thermoplastic additives to plasticize powdered raw materials that are subjected to the injection...

  • Injection Molding
  • Motor Vehicle
  • World
  • Demand
  • Market Size
  • TECHNOLOGICAL INNOVATIONS IN INJECTION MOLDING ROBOTS
  • ADVANTAGES OF ADOPTING ROBOTS FOR INJECTION MOLDING

About Robotic Injection Molding Machine The past decade has seen a rise in adoption of robotics in the global rubber and plastics industries. The deployment of robots for plastic processing has ushered in various possibilities to improve the performance and productivity of the industries. The current report...

  • Injection Molding
  • Forecast
  • Market Size
  • Battenfeld Group
  • Sepro Group

Global and China Injection Molding Machine Industry Report, 2017-2021 ## Overview of Injection Molding Machine Industry ##. ## Introduction to Injection Molding Machine ##. ##. ## Definition and Classification ##. ##. ## Characteristics ##. ##. ## Operatin

  • Injection Molding
  • Manufacturing
  • China
  • Demand

MARKET ##.

  • Injection Molding
  • Manufacturing
  • APAC
  • Japan
  • Demand

##-shot Injection Molding Market - Global Industry Analysis, Size, Share, Growth, Trends, and Forecast 2016 - 2024 ##.

  • Injection Molding
  • Manufacturing
  • APAC
  • World
  • Market Size

The 2019-2024 World Outlook for Powder Injection Molding (PIM) Components ## INTRODUCTION ##. ## OVERVIEW ##. ## WHAT IS LATENT DEMAND AND THE P. I. E.?

  • Injection Molding
  • Manufacturing
  • World
  • Demand
  • Capital intensity
  • Industry Performance

Building up: Revenue is increasing, thanks to the rebound in consumer spending Abstract Contract Injection Molding Manufacturing Operators in the Contract Injection Molding Manufacturing industry use injection molding machinery to provide products as inputs to a wide variety of downstream manufacturing industries...

  • Injection Molding
  • Manufacturing
  • Plastic
  • United States
  • Demand
  • 50.31% of the market share comes from injection molding
  • Global bio PP market in injection molding

About Bio Polypropylene Polypropylene (PP) is a thermoplastic polymer discovered by the joint effort of Karl Rehn, a German chemist and Montecatini, an Italian chemist in the year 1954. PP is highly popular due to its high melting point (Tm=165C) and ability to process using injection moldings. Bio PP involves the use of eco-friendly...

  • Injection Molding
  • Polypropylene
  • World
  • Forecast
  • Braskem S.A.
  • INJECTION MOLDING - MARKET SIZE AND FORECAST 2017-2022
  • INJECTION MOLDING - YEAR-OVER-YEAR GROWTH 2018-2022 (%)

About High-density Polyethylene HDPE is a type of polyethylene with a density greater than 940 kg/m3 and is mainly produced in low-pressure reactors. The high density of HDPE with stronger intermolecular force offers excellent physical properties such as rigidity, toughness, and strength. Hence, HDPE resins are used...

  • Injection Molding
  • World
  • Borealis AG
  • ExxonMobil Corporation
  • INEOS Group
  • INJECTION MOLDING - MARKET SIZE AND FORECAST 2016-2021
  • INJECTION MOLDING - YEAR-OVER-YEAR GROWTH 2017-2021 (% SHARE)

About Low-density Polyethylene (LDPE) Polyethylene (PE) refers to a polymer of ethylene, particularly belonging to the category of lightweight thermoplastics. Polyethylene is partially crystalline in nature and has a high resistance to chemicals and moisture. Globally, it is the most commonly used plastic. It is used in the production...

  • Injection Molding
  • World
  • Borealis AG
  • CNPC
  • Dow Chemical Company
  • 7.2 INJECTION MOLDING
  • INJECTION MOLDING ACCOUNTED FOR LARGEST MARKET SHARE IN 2016

Polypropylene market projected to grow at a CAGR of 5.6% during the forecast period The polypropylene market size is estimated at USD 75.40 billion in 2017 and projected to reach USD 99.17 billion by 2022, at a CAGR of 5.6% between 2017 and 2022. Polypropylene is a thermoplastic polymer which is used in a variety of applications,...

  • Injection Molding
  • World
  • Market Size
  • INEOS Group
  • SABIC
  • LLDPE MARKET IN INJECTION MOLDING APPLICATION, BY REGION,
  • ASIA PACIFIC IS PROJECTED TO LEAD THE INJECTION MOLDING APPLICATION

The LLDPE market is expected to grow at a CAGR of 5.5% from 2017 to 2022, in terms of value. The LLDPE market is estimated to be USD 51.89 billion in 2017 and is projected to reach USD 67.83 billion by 2022, at a CAGR of 5.5% between 2017 and 2022. The growth of the LLDPE market can be attributed to the availability of...

  • Injection Molding
  • Market Size
  • Borealis AG
  • Dow Chemical Company
  • INEOS Group
  • Husky Injection Molding Systems
  • Advanced process control and monitoring system for injection molding

About Plastic Processing Machinery Plastic processing machinery is used to create plastic products using pellets, granules, and powdered forms of raw materials such as resin and crude oil. Industrial plastic processing machinery includes machines such as IMMs, extruders, BMMs, hollow molders, 3D plastic printers, and thermal forming...

  • Injection Molding
  • Motor Vehicle
  • Plastic And Rubber Machinery
  • World
  • Market Size
  • 8. Latest update
  • 11. General News, Project News

Synopsis "MG – Kenitra Car Component Injection Molding plant – Morocco - Project Profile" contains information on the scope of the project including project overview and location. The profile also details project ownership and funding, gives a full project description, as well as information on contracts, tendering and...

  • Auto Parts
  • Construction
  • Injection Molding
  • Morocco
  • MECAPLAST Group
  • 8.4 INJECTION MOLDING
  • APA MARKET SIZE IN INJECTION MOLDING FABRICATION PROCESS, BY REGION, 2014-2026 (KILOTON)

“APA market projected to register a CAGR of 6.2%” The global acrylic processing aid (APA) market was USD 645.4 million in 2016, and is projected to reach USD 1,173.6 million by 2026, registering a CAGR of 6.2% between 2016 and 2026. The growth is primarily triggered by the need of cost-effective aid for manufacturing plastic products....

  • Injection Molding
  • Market Size
  • Arkema S.A.
  • Kaneka Group
  • LG Chem, Ltd.
  • 7.3 INJECTION MOLDING
  • INJECTION MOLDING MACHINES SOLD WORLDWIDE, 2012

Purging Compound market is projected to grow at a CAGR of 5.4% The purging compound market is projected to reach USD 586.3 Million by 2022, at a CAGR of 5.4% from 2017 to 2022. Factors such as increasing use of purging compound in various industries leads to a reduction in machine downtime, low production cost, and less...

  • Injection Molding
  • World
  • Asahi Kasei Corporation
  • Dow Chemical Company
  • Kuraray Group
  • HUSKY INJECTION MOLDING SYSTEMS SA
  • Summary 1 Full name of company:

Husky Injection Molding Systems is expected to continue to focus on higher penetration by offering complex packaging solutions, starting from the packaging machinery and ending with everyday supplies, such as PET bottle preforms and closures. Euromonitor International Local Company Profiles are a concise set of briefings detailing the...

  • Injection Molding
  • Manufacturing
  • United Arab Emirates
  • Demand
  • Supply
  • HUSKY INJECTION MOLDING SYSTEMS SINGAPORE PTE LTD
  • Passport 1

Husky Injection Moulding Systems Singapore has grown by constantly investing in new technology and innovation to provide comprehensive service to clients. As the leading player within the industry, Husky Injection Moulding Systems Singapore constantly provides up-to-date packaging solutions to benefit clients. Euromonitor International...

  • Injection Molding
  • Singapore
  • Demand
  • Market Competition
  • Singapore Pte Ltd
  • Disadvantages of injection molding
  • Market challenges

About Molded Plastic Packaging Molded plastics can be defined as plastics that are molded into various shapes and sizes or into different forms such as jars, bottles, and plastic tubes. A mold is a hollow material which can be of any shape or size, filled with liquid or any other material such as plastic or glass. The liquid...

  • Injection Molding
  • Thermoplastic
  • North America
  • United States
  • Forecast
  • Global metal injection molding market 2015
  • Metal injection molding market in North America by end-users 2015

About the Iron Powder Market in North America Iron powder has numerous applications based on its type and method of manufacture. The iron powder particles range in size from 20 micrometer to 200 micrometer. It is used in brazing, sintered parts, metallurgical applications, laboratory studies, chemical processes, and others. Technavio’s...

  • Injection Molding
  • Metals
  • North America
  • Market Size
  • Ashland Inc.
  • INJECTION MOULDING: PP SUPPLIERS, MT
  • INJECTION MOULDING: PP SUPPLIERS IN 2015, MT

General Information on the Report - The Annual Reports have been framed so that you could get a maximum complete and detailed picture after you have read it. We did our utmost to present the Report as an annual market encyclopaedia. - Our reports can be used for the benefit of: § companies that are developing business plans...

  • Injection Molding
  • Russia
  • United States
  • Market Size
  • Borealis AG

It also discusses ceramic injection molding in detail.

  • Injection Molding
  • Manufacturing
  • United States
  • World
  • Market Size

PET in Russia 2016

3580 3938 3043
  • Injection molding: PET supply analysis, %
  • Injection molding: PET suppliers, MT

General Information on the Report - The Annual Reports have been framed so that you could get a maximum complete and detailed picture after you have read it. We did our utmost to present the Report as an annual market encyclopaedia. - You also find the video of Russian top-managers who are discussing situation on the market...

  • Injection Molding
  • Eastern Europe
  • Russia
  • Market Size
  • Supply
  • INJECTION MOLDING TO DOMINATE THE GROWTH BETWEEN
  • NATURAL FIBER COMPOSITES MARKET SIZE IN INJECTION MOLDING, BY REGION, 2014-2021 (USD MILLION)

“Increasing demand for lightweight and environmentally friendly materials to drive the NFCs market” The Natural Fiber Composites (NFCs) market is projected to reach USD 6.50 billion by 2021, expected to register a CAGR of 11.68% between 2016 and 2021. The major drivers stimulating the growth of the NFCs market are increasing use of...

  • Injection Molding
  • United States
  • Fiberon LLC
  • Trex Company, Inc.
  • Weyerhaeuser Company

I-##. ## Asia I-##. ## Europe I-## Trend of Global Metal Injection Molding Industry II Technology II-## Domestic method of manufacture II-## Technology advantages II-## Characteristics of adhesive removal techniques II-## Metal injection molding problem II-## Metal

  • Injection Molding
  • Manufacturing
  • China
  • Supply
  • Category
  • AGREEMENT

“Stringent environmental regulations and fluctuating fuel prices are expected to drive the market during the forecast period.” The bioplastics & biopolymers market is projected to witness a CAGR of 12.0% from 2016 to reach a market size of USD 5.08 billion by 2021. The growth of the market is attributed to the stringent environmental...

  • Injection Molding
  • Market Size
  • Braskem S.A.
  • Corbion nv
  • Metabolix, Inc.
  • Global industrial robotics market in rubber and plastic industry 2015-2020 (unit shipment)
  • Global industrial robotics market in rubber and plastic industry 2015-2020 ($ billions)

About Industrial Robotics Robots execute multiple complex tasks with high speed, precision, and accuracy. The rubber and plastic industry has many complex processes, such as molding, stamping, pressing, cutting, dispensing, and painting, which can be done with the help of industrial robotic solutions. The robots have application in...

  • Injection Molding
  • World
  • Market Size
  • Kawasaki Heavy Industries, Ltd.
  • Mitsubishi Corporation
  • Injection Molding
  • 8.5 INJECTION MOLDING

In recent years, biodegradable plastics have found wide acceptance in various industries because of its properties such as low carbon footprints and compostability. These properties can help in limiting the degradation of the enviorment caused by the use of petroleum based plastics. On the basis of applications, the market for biodegradable...

  • Injection Molding
  • BASF SE
  • Corbion nv
  • Metabolix, Inc.
  • Mitsubishi Corporation