The drip irrigation market is projected to grow at a CAGR of 10.8%; the key drivers include efficiency in water use in drought-prone areas, cost efficiency in agriculture production and enhanced crop yields
The drip irrigation market is estimated at USD 5.5 Billion in 2020 and projected to grow at a CAGR of 10.8%, to reach USD 9.3 Billion by 2025. The growth of the drip irrigation market is driven factors such as government initiatives, water conservation activities, enhancement of production, and decrease in production cost. This market is also driven by factors such as population growth, increasing withdrawal of water for agriculture, limited land resources, unpredictable rainfall patterns, and demand for biofuel in developing countries.
The drip tube/drip line component led the market with the largest share in 2020. Based on component, the drip irrigation market is classified into emitters/drippers, pressure pumps, drip tubes/drip lines, valves, filters, fittings & accessories.The drip tube is a crucial part of the drip irrigation process.
Often manufactured out of polyethylene, the tubing is responsible for transporting water from the source to the plants where the water is released by emitters and drip lines.Large scale drip tubes employ main lines that lead to several control valves located at different areas of a farm.
Drip lines are drip tubes with pre-installed emitters that direct the flow of water to plants without the need for additional emitters. The emitters are molded into the tubing wall at regular intervals, and all that is visible on the outside is a hole for the water to flow out.
Surface drip irrigation holds the dominant market share in the application segment in the drip irrigation market. Based on the application, the surface segment is expected to hold the largest market share between 2020 and 2025.Surface equipment is often made of polyethylene and is perceived as a temporary solution as the dripline is retrieved and recycled yearly.
The submains can be permanent or temporary.These systems are used typically on high-value crops due to the yearly expense on new dripline and the labor for installation.
Surface drip systems are adopted either as a full scale mainline or drip tape, which is folded for reuse.The installation costs for surface systems are lesser than that of subsurface systems.
Surface drip irrigation equipment is widely used to irrigate perennial crops (trees and vines) and annual row crops. However, the design and management of irrigation equipment for these types of crops are different as compared to other row crops.
High growth is projected in the Asia Pacific drip irrigation market.
The Asia Pacific market is projected to be the fastest-growing market for the period considered for this study due to the strong potential for precision irrigation systems through the technological upgrade of current systems and components.The focus of agriculture has shifted from traditional crops to more commercial crops.
Due to these changes, irrigation facilities are expected to modernize their irrigation management and preferably their infrastructure. Drip irrigation has become an essential aspect as commercial crops are sensitive to the amount of water required and the time taken for its delivery.
Break-up of Primaries: • By Company Type: Tier 1 - 70 %, Tier II - 25%, and Tier III – 5% • By Designation: C Level - 50%, D Level - 30%, and Others* - 20% • By Region: Asia Pacific – 45%, North America - 21%, Europe - 12%, , South America – 12% and RoW** - 10%
*Others include sales managers, marketing managers, and product managers. **Rest of the World (RoW) includes South America, Africa, and the Middle East.
Research Coverage: The report segments the drip irrigation based on component, crop type, application, emitter type, and region. In terms of insights, this report has focused on various levels of analyses—competitive landscape, end-use analysis, and company profiles, which together comprise and discuss views on the emerging & high-growth segments of the global drip irrigation, high-growth regions, countries, government initiatives, drivers, restraints, opportunities, and challenges.
Reasons to buy this report: • To get a comprehensive overview of the drip irrigation • To gain wide-ranging information about the top players in this industry, their product portfolios, and key strategies adopted by them • To gain insights about the major countries/regions in which the drip irrigation market is flourishing
Our reports have been used by over 10K customers, including:
Mechanized Irrigation System Market Research Report by Type (Center Pivot Irrigation Systems, Lateral Pivot Irrigation Systems, Mobile Irrigation Systems, Permanent Set Irrigation Systems, and Side Roll Irrigation Systems), by Field Size (Large, Medium, and Small), by Application - Global Forecast to 2025 - Cumulative Impact of COVID-19 The...
The increase in the land area being brought under cultivation is one of the major driving factors for the agricultural pump market. The global agricultural pumps market is estimated to be valued at USD 4.2 billion in 2020. It is projected to reach a value of USD 6.1 billion by 2025, growing at a CAGR of 7.6% during the forecast period....
384 pages •
By Global Industry Analysts
• Sep 2020
Global Mechanized Irrigation Systems Market to Reach $31.5 Billion by 2027 Amid the COVID-19 crisis, the global market for Mechanized Irrigation Systems estimated at US$12.9 Billion in the year 2020, is projected to reach a revised size of US$31.5 Billion by 2027, growing at aCAGR of 13.6% over the period 2020-2027. Central Pivot,...
282 pages •
By Global Industry Analysts
• Sep 2020
Global Greenhouse Irrigation System Market to Reach $2.1 Billion by 2027 Amid the COVID-19 crisis, the global market for Greenhouse Irrigation System estimated at US$1.1 Billion in the year 2020, is projected to reach a revised size of US$2.1 Billion by 2027, growing at a CAGR of 9.3% over the analysis period 2020-2027. Drip Irrigation,...
Anal Irrigation Systems Market Research Report by Product (Balloon Catheter Devices, Bed Systems, Cone Devices, and Mini Devices), by Patient (Adults and Children), by End-User - Global Forecast to 2025 - Cumulative Impact of COVID-19 The Global Anal Irrigation Systems Market is expected to grow from USD 890.05 Million...
In terms of revenue, the global irrigation automation market was valued at US$ 2.47 billion in 2019 and is projected to reach US$ 9.63 billion by 2027. Owing to factors such as favorable government support to encourage water and energy conservation, and rising demand for food with a growing population, the necessity for advanced irrigation...
Sprinkler Irrigation System Market Research Report by Type (Central Pivot, Lateral Move, and Solid Set), by Mobility (Permanent System and Portable System), by Crop Type, by Application - Global Forecast to 2025 - Cumulative Impact of COVID-19 The Global Sprinkler Irrigation System Market is expected to grow from USD...
Drip Irrigation Market Research Report by Crop (Field Crops, Fruits & Nuts, and Vegetable Crops), by Type (Inline Emitters and Online Emitters), by Component, by Application - Global Forecast to 2025 - Cumulative Impact of COVID-19 The Global Drip Irrigation Market is expected to grow from USD 5,061.49 Million in 2019...
Agriculture & Farm Machinery Market Research Report by Machinery Type (Harvesting Machinery, Haying and Forage Machinery, Irrigation Machinery, Planting and Fertilizing Machinery, and Plowing and Cultivating Machinery), by Application (Harvesting & Threshing, Land Development & Seed Bed Preparation, Plant Protection, Post-harvest &...
268 pages •
By Global Industry Analysts
• Jul 2020
Global Micro Irrigation Systems Market to Reach $12.1 Billion by 2027 Amid the COVID-19 crisis, the global market for Micro Irrigation Systems estimated at US$5.5 Billion in the year 2020, is projected to reach a revised size of US$12.1 Billion by 2027, growing at a CAGR of 11.8% over the analysis period 2020-2027. Drip Irrigation...
You can change your Cookie Settings at any time but parts of our site will not function correctly without them.